Location And Connection; Set-Up And Operation; Safety Features - EUROM SAFE-T-HEATER MINI 500 Manuel D'utilisation

20. Close supervision is necessary if the product is used near children or incapacitated persons. Do not let
children use the appliance as a toy. This appliance is not suitable to be operated by children or persons
who have no knowledge of or experience with the heater.
21. Keep the heater clean. Dust, dirt and/or a build up of deposits in the heater are a common cause of
overheating. Make sure these deposits are removed regularly.
22. Do not turn on the appliance if you have discovered damage to the heater itself, the cord or the plug, if the
appliance is malfunctioning, if it has been dropped or if there are signs of any other defect. Return the
product to the vendor or to a certified electrician for inspection and/or repair. Always ask for the original
parts.
23. Do not use attachments and/or accessories that have not been recommended or supplied by the
manufacturer.
24. The appliance may only be opened and/or repaired by properly authorized and qualified persons.
25. Only use this heater for its intended purpose and as set out in this instruction manual.
Not abiding by instructions 23, 24 and 25 may lead to damage, fire and/or personal injuries. A failure to adhere to
these rules also immediately nullifies the guarantee and the vendor, importer and/or manufacturer take no
responsibility for the consequences!
Description

Location and Connection


Remove all packaging material and keep out of reach of children. After removing the packaging, check the
appliance for damage or other signs of a fault/defect/malfunction. In case of doubt, do not use the appliance
and contact your vendor for inspection or replacement.

Choose a suitable location for the heater. Locate at least one metre away from any obstructions, walls or
inflammable materials (see also safety instructions).

Make sure the heater is always in an upright position on a solid, smooth and horizontal foundation.

Set-up and operation


Make sure that the heater is switched off (O pushed in) then plug into a correctly functioning 230V-50Hz
socket.

Turn the heater on by pushing the on/off switch to „on‟ (I pushed in). The heater will now begin to
disseminate hot air.

If you want to turn the heater off, switch to „off‟ (O pressed in) and then remove the plug from the socket.
Never leave the plug in the socket when the heater is not in use!

Safety features

The heater is fitted with a tipping safeguard which automatically shuts off the appliance if it inadvertently falls
over. The heater will function as normal once it is returned to its upright position. You are advised, however, to
check the heater for damage and defects!
1 – Top guard
2 – Front air outlet grill
3 – Side and back casing
4 – Back air intake grill
5 – On/Off switch
6 – Tipping safeguard
6