Pan Detection; Indications In The Display - ETNA KIF160ZT Mode D'emploi

USE
Power limitation
(7 kW or 3.5 kW)
Left
front
7 kW (P5)
4 zones in use
3.5 kW (P2)
4 zones in use
3.5 kW (P2)
3 zones in use

Pan detection

If the hob does not detect a (ferrous) pan after the cooking power has been set, the pan
detection symbol and the selected power setting will flash alternately in the display and the hob
will remain cold. If a (ferrous) pan is not placed on the cooking zone within 1 minute, the cooking
zone will automatically switch off (see also chapter 'Pans').

Indications in the display

Display
Status
The induction hob is switched on and has entered the state of standby mode. This
indication appears next to the cooking zone key.
The induction hob is switched on and has entered the state of standby mode. This
indication appears next to the timer key.
Power setting cooking zone; 1 = low setting / 9 = high setting.
Boost function active.
Timerconnection indication. This indication appears when the timer is connected
to a cooking zone.
No (suitable) pan on cooking zone (pan detection symbol).
Child lock function selected.
Connection symbol: the bridge induction cooking zones are connected.
Maximum setting
Left Right
rear rear
9 b 9
b 9 b
b b
5 7 5
5 5
8 6 8
0 6 8
6 0
6 8
Right
front
b
9
9
7
7
0
6
6
0
EN 9