Accessories - Megger SCITS100 Mode D'emploi

Accessories

Accessories supplied with the equipment
Accessories supplied as an optional extra
SF30 Filter Unit
The optional SF30 Filter Unit is connected in series with the output of the Secondary Current Injection Test Set. It is
used to correct the output waveform, distorted by saturated cores in the device under test (see waveform diagram,
page 12).
It has tappings for the 1 A, 2 A, 5 A, 10 A and 30 A ranges and takes the form of a tuned series circuit consisting of
a capacitor and an inductor, designed to exclude frequencies other than the fundamental. Sockets are provided to
select either 50 Hz or 60 Hz. As with the SCITS100 itself, there is an earth terminal for use as required.
Specification
Ranges
Dimensions
Weight
2 m remote counter control switch
Set of spare fuses
Cotton reinforced P.V.C. lead storage bag
Black ABS plastic cover
Operating instruction book
Set of output leads 3 m long
Trolley
SF30 Unit (see below for details)
Variac Brush Set Assembly
All outputs are relative to a common terminal
0–1 A
1–2 A
2–5 A
5–10 A
10–30 A
490 x 165 x 270 mm (19 x 6 x 10 in)
13 kg (30 lb)
part no. 6231-216
part no. 6121-181
part no. 6220-302
part no. 5310-245
part no. 6171-148
part no. 6220-303
part no. 6320-224
part no. 6410-223
part no. 6121-350
9