Fimap FM43 Manuel D'utilisation Et D'entretien page 25

The appliance must never be used in environments with a
potentially explosive atmosphere.
• Do not place any liquid containers on the appliance.
• In the event of a fire, use a powder extinguisher. Do not use
water.
• Adapt the speed to the adhesion conditions.
• Avoid using the brushes while the appliance is at a standstill,
so as not to damage the floor.
• Do not knock against shelving or scaffolding, where there
is a danger of falling objects. The operator must always be
equipped with the appropriate safety devices (gloves, shoes,
helmet, goggles, etc.).
• If the appliance does not work properly, check this is not
caused by failure to carry out routine maintenance. Otherwise,
ask for intervention of the authorised technical assistance
centre.
• If you need to replace any components, request the ORIGINAL
spare parts from an Authorised dealer and/or Retailer.
• Restore all electrical connections after any maintenance
interventions.
• Have the appliance checked by an authorised technical
assistance centre every year.
• When disposing of consumable materials, observe the laws
and regulations in force. When, after years of valuable work,
your appliance needs to be finally decommissioned, dispose
of the materials contained in it appropriately, bearing in mind
that the appliance is made of fully recyclable materials.
• If the power supply cable gets damaged, the appliance must
be stopped if it is operating. Disconnect the plug from the
power supply, and have the cable replaced immediately by
an authorised service centre.
• Before using the appliance, check that all the hatches and
covers are positioned as shown in this Use and Maintenance
Manual.
22