Alarm Descriptions - Nilfisk Ecolab Inspexx SD Mode D'emploi

Alarm list user
Fig. 7.0 Return to front page.
Fig. 7.1 Sets all to ACK. (ACK=Alarm receipt)
Fig. 7.2 Go to top of alarm list.
Fig. 7.3 Go up on the alarm list.
Fig. 7.4 Go down on the alarm list.
Fig. 7.5 Go to the end of the alarm list.

Alarm descriptions

ID Message
5 Warning, chemical can is almost empty
6 Stop, Chemical can empty.
7 Stop, Mixing can too full.
31 Max. Limit for chemical reached. (In permille)
32 Min. Limit for chemical content reached. (In permille)
44 USB Stick missing.
45 Error on USB Stick.
54 Stop. Mixing can is empty. The pump stops.
111 Flow sensor for water is out of order.
Error - HMI
This screen picture indicates that there is no communication between PLC and HMI.
16