Warranty; End Of Use; Dismounting; Disposal - Nilfisk Ecolab Inspexx SD Mode D'emploi

14. Warranty

ATTENTION
Our guarantee is given for a period of 12 months from
delivery on all parts which have provable become
unfit for use due to material, construction or manu-
facturing defects as well as inadequate work. The
guarantee compensation will occur in the shape of
reimbursement, replacement or repair of the defective
or damaged part at our works. Installation and freight
costs are always on the purchaser's account. Any de-
fective parts are to be placed at our disposal. Claims
that may otherwise be raised for any legal reason will
not be acknowledged. No liability will be accepted for
damage occurred indirectly. The purchaser has no
right to let any third party repair possible defects on
our account.
All hoses, rubber parts or synthetic materials natural
wear and tear as well as damage caused by care-
less and inappropriate handling, including transport
damage are not covered by the guarantee. Further,
the guarantee does not apply if the system has been
subjected to frost. The obligation of guarantee com-
pensation also ceases if changes or repairs are made
by non-authorized persons. Claims under the guaran-
tee will only be acknowledged when they are placed
immediately after the defect has been noticed. The
guarantee ceases in case of change of ownership.
The dealer cannot be held responsible for personal
injury, damage to equipment, working deficits, includ-
ing production loss, loss of profits, loss of stock or
the like which may occur by imperfect and delayed
delivery of the sold product, regardless of the reason,
including manufacturing and material defects. Please
see our standard terms of sale and delivery.

15. End of Use

CAUTION
Disposal of electronic components
and other remedies must be handled
as special disposal when disposed.
Alternatively, it can be disposed by a
specialised disposal company.

15.1. Dismounting

Close all supply valves and remove the unit from wall.

15.2. Disposal

In case the unit should be disposed, it must be sepa-
rated and sorted in eg-recyclable and non recyclable
parts.
The steel construction is easily separated and dis-
posed and constitutes no environmental risk - nor for
the user. Disposal must be made according to rules
and regulations in force for disposal of machines as
well as all standards in connection with environmental
protection.
19