Settings For Inspexx Sd Unit 119000354; Maintenance; Instructions; Maintenance Kits - Nilfisk Ecolab Inspexx SD Mode D'emploi

11. Settings for Inspexx SD Unit
119000354
Flow sensor water:
IMPS: 1,0
IMPR: YES
OU1: IMP
OU2: I
RSP: 0,0
REP: 50,0
EP: HI
Controller:
User: 9030
Password: 9030
Manufactory settings:
Sensors: ON
Type; Inspexx SD 210
Min. lim: 0,05
Max. lim: 0,30
Batch level: 100 l
Pulse rate chemical: 0,5 ml
Pulse rate water: 1000 ml
Settings:
Min.: 0,12%
Max.: 0,20%
Total: Reset
Alarm: Clear all
Pump pressure out: 5 bar
Pressure switch start: 3 bar
Dosatron setting (conc.): 0,15% at display off

12. Maintenance

12.1. Instructions

a) After one month of use the Phoenix station must
be maintained by a service engineer. The functional-
ity and any possible errors should be maintained.
Furthermore, the unit must be checked for leaks.
The above maintenance should be carried out mini-
mum every third month. If required the interval might
be shorter.
b) Depending on usage, at least once a year mainte-
nance should be undertaken by an authorized service
engineer in order to prevent defects and failure of op-
eration. Authorized engineers are persons who due to
their skills and experience have sufficient knowledge
of the unit in question and are confident with the state
work safety regulations, accident preventing regula-
tions, lines and generally acknowledged technical
regulations such as DIN-norms and VDE provisions.
For your safety this cleaning unit has been manu-
factured according to all relevant regulations valid in
the EU and it has therefore been fitted with the CE
marking.

12.2. Maintenance kits

The dosing pumps have some moving parts and in
the combination with different detergents these parts
have to be changed during time and use. It is rec-
ommended to make service at these pumps due to
working conditions to keep these in function. O-ring
in motor part and or in dosing part should be changed
during service. There is for these pumps one o-ring
kit for the motor part and two kits for the dosing part –
depending on the detergent – AF or VF material.
Item no.
110006121
Description
Service kit for dosing pump Alkaline products D3RE
Item no
110006122
Description
Service kit for dosing pump acid products D3RE
17