Technical Data; Before Initial Use - Charge Battery; Before Getting Started - Brill Evolution LION 36 Traduction Du Mode D'emploi Original

Technical Data

Battery-Lawnmower evolution LION 36
Part number
Moisture protection
Cutting width
Cutting height
Sound power level
Sound pressure
Weight
Capacity of grass catcher
Protection class
Motor
Operating voltage
Speed
Battery
Type
Nominal voltage
Charger
Input voltage
Nominal consumption
Output voltage
Charging current
Charging current
Charging temperature range 0 °C to 45 °C
Before initial use
– charge battery
For your safety
It is essential that you also follow the"Safety instruc-
tions for handling charger and battery" in chapter
"Important safety instructions".
The mains voltage must be in compliance with the
voltage specification (V~) on the type plate of the
charger.
Use only the supplied charger with corresponding
original Li-Ion battery. Operate charger only in dry
rooms.
24
61056
IPX 1
36 cm
1,6 - 7 cm / 7 settings
94 dB (A)
81 dB
approx. 19 kg
36 L
III
25,2 V
max. 3700 rpm
Li-Ion US 18650V1
25,2 V / 3,9 Ah
100 V - 240 V
50 W
25,9 V
900 mA
max. 4,5 Std.
For your information
The supplied battery is only partially charged.
Before initial use, fully charge battery. Charging
time during initial use is approx. 4,5 h. During this
time, ensure that charging temperature stays
between 0 °C and +45 °C. This is the only way to
ensure a long battery life.
A significantly decreased runtime in spite of
charging indicates that the battery is dead and
must be replaced. Use only original Li-Ion batter-
ies, which you can purchase from manufacturer's
customer service.
Charger and battery can heat up during charging.
This is normal and not a sign of a technical defect.
The supplied Lithium-Ion battery has no memory
effect and can be charged at any time, regardless
of charge state. Premature interruption of charg-
ing does not cause damage to the battery. A pro-
tective circuit on the mower prevents depth dis-
charge of battery.
Charging
Remove battery from packaging
A
Figure
Connect charging plug of charger 22 with contact
A
socket on battery19. Now plug the charger 22 into
the power socket. Charging begins when green LED
is flashing.
Charging is finished when charge indicator on charger
illuminates in green. After charging is finished, first dis-
connect plug of charger from power socket, then remove
charging plug from battery
Charging time for a full charge is approx. 4,5 h.

Before getting started

The mower is completely assembled in factory,
except for battery 19.
Positioning of guide handle
B D
Figures
–
Open lock 11 to unlock guide handle 1.
B
Fold guide handle 1 into a position that allows
C
proper ergonomic use. 6 lock positions, thus 6 dif-
ferent height settings are possible.
.