Eurosystems Z2 Mode D'emploi page 11

List of contents
Introduction
Conditions of use
Safety measures
Assembly
Regulating
Instructions for operating
Maintenance
Technical Details
Noise
Accessories
Serious risk for operator
and bystander safety.
INTRODUCTION
Dear Customer:
Thank you for your confidence in purchasing our products. We wish you to enjoy using our machines.
The following working instructions have been issued to ensure you a reliable running from the beginning. If you
carefully follow such information the machine will operate with complete satisfaction have a long service life.
Our machines are tested under the most severe conditions before being put into production and are subjected to strict
continuous tests during manufacturing stages. This present unit has been tested in the country of origin by
independent testing authorities in accordance with strict work norms and safety standards.
When required, only original spare parts must be used to maintain guaranteed function and safety levels.
The operator forfeits any claims which may arise, if the machine shows to be fitted with components
other than original spare parts. Subject to changes in design and construction without notice. For any questions or
further information and spare part orders,we need to be informed of the unit serial number printed on the side of the
machine.
IDENTIFICATION DATA (Fig. 1)
the cultivator under the engine. Note - Always state your motor cultivator serial number when you need Technical
Service or Spare Parts.
CONDITIONS AND LIMITATIONS OF USE
motor-hoe must only be used with original equipment and spares. Any use other than those described above is
prohibited and will involve, in addition to cancellation of the warranty, serious risk for the operator and bystanders.
SAFETY PRECAUTIONS
Attention: Before assembly and putting into operation, please read the operating instruction carefully.
Persons not familiar with these instructions should not use the machine.
1 Persons under 16 should not be allowed to use the machine.
2 When operating the machine, the user should ensure that no others, particularly children, are standing in
the area. Please, remember that you are responsible for the safe operating of your machine vis-a-vis third
persons.
3 Before starting to mill, remove any foreign bodies from the soil. Work only in daylight or in good artificial light.
4 Do not start the machine if standing in front of the rotary cutter, neither get near the machine when working. If
pulling the starter short rope, the rotary cutter and the machine have to standstill (if rotation is experienced, take
action on the belt stretcher control nut).
5 For greater protection during work, sturdy footwear and long trousers should be worn. Be very careful,
when working, the blade is potentially hazardous for hands and feet. Always walk and never run while
operating the machine.
The tag plate with the machine data and Serial N° is on the left side of
This motor-hoe is designed and built to hoe the land. The
5