Accessing History Values - Pentair 368 Notice D'utilisation

Accessing History Values

The control features a review level that displays the operationhistory of the system. This is a great
troubleshooting tool for the control valve.
To access history values, press together Manual regen button
3 seconds to view the Diagnostic Codes.
If a button is not pushed for 30 seconds the controller will exit the history
NOTE:
table.
Press the Time button to increment through the table. When the desired code is reached, Press the
Salt button to display the value.
Some of the values have four digits 1, 2, 3, 4. Press the Salt button
Press the Water Hardness button to display the last two (3, 4).
When the Salt button
Continue to press and release the Salt button
on the display will flash when there is flow thru turbine.
16
Rev B
is pressed to view H2 the current flow rate will be displayed but not updated.
every 5 seconds to update the display. The flow dot
with the Salt button
to display the first two (1, 2).
Liter per minute
Pentair Residential Filtration, LLC
and hold for