Joerns Oxford Calibre Manuel De L'utilisateur page 7

Oxford
®
English
Calibre
6. Insert quick-release pin sleeve into mounting bracket/actuator hole. Make sure the sleeve is
fully engaged in the hole on both mounting brackets.
7. Insert the quick-release pin through the quick-release pin sleeve until it is fully located.
WARNING
Check that the quick-release pin has been fully inserted by trying to push the pin back out.
8. Fit power pack to the lift and make sure the latch holding the pack in place is fully engaged.
"Click" in place. Check that the battery is fully charged.
9. Plug the handset into the control box.
7