Assembly And Commissioning Instructions; Carton Contents; Tools Required - Joerns Oxford Calibre Manuel De L'utilisateur

English

3. Assembly and Commissioning Instructions

Carton Contents

Place the carton in a clear working area and open carefully. The carton contains:
• OXFORD CALIBRE LIFT
• HAND CONTROL
• CHARGING LEAD

Tools required

The following tools will be required for assembly:
• 13MM SOCKET
Assembly and commissioning must be carried out by a competent engineer from an autho-
rised Oxford Service Agent/Dealer.
A MINIMUM OF 2 PERSONS REQUIRED. The Oxford Calibre is heavy and will need to be
lifted with care. You will need assistance to lift the Oxford Calibre from the carton.
Assembly Instructions
Remove all the parts from the carton and place on the floor, taking care to protect the paint finish
from damage.
1. Place the mast/base assembly in a clear space and lay with rear castors and push handle on floor.
2. Fit the left and right hand legs (check correct orientation) onto the chassis using two M10
screws per leg as provided.
• WALLET CONTAINING DOCUMENTS
• BATTERY PACK
• DESK TOP CHARGER/STAND
• TORQUE WRENCH
WARNING
WARNING
Oxford
®
Calibre
5