Safety Instructions; General Safety Information For Power Tools - Okay EHS 650 Mode D'emploi

General safety instructions
Usage of hedge trimmer always involves a
risk of accidents, therefore please observe
the relevant accident prevention instruc-
tions.
The machine has been constructed according
to the latest technology and in accordance with
the recog-nised technical safety regulations.
Nevertheless, use of the machine can involve
risks to the user or third persons, and can cause
damage to the machine or other objects.
Attention: Using electric power tools, you must
observe following fundamental safety instruc-
tions to protect yourself against electric shock,
against danger of injuries and danger of fire.
Read all these instructions before using the
hedge trimmer and observe them. Keep these
safety instructions at a safe place.
Use the machine in a safety conscious manner
for suitable applications in a technically perfect
condition only and with due regard to the oper-
ating instructions! Immediately rectify or have
rectified any faults which could adversely affect
safety!
This machine may cause serious injuries. Please
read the instruction manual carefully as to the
correct handling, the preparations, the mainte-
nance and the proper use of the hedgetrimmer.
Familiarize your-self with the machine before
the first use and also have yourself introduced
to practical use of the machine.
This appliance is not intended for use by per-
sons (including children) with reduced physical,
sensory or mental capabilities, or lack of experi-
ence and knowledge, unless they have been
given supervision or instruction concerning use
of the appliance by a person responsible for
their safety.
Children should be supervised to ensure that
they do not play with the appliance.

General safety information for power tools

Attention! Read all instructions contained here-
in. Failure to observe the following instructions
may result in electric shock, burns and/or se-
vere injury. The term 'power tool' used in the
following includes both mains-operated tools
(with mains supply) and battery-operated tools
(without mains supply).
KEEP THESE INSTRUCTIONS CAREFULLY!
GB | Operating Instructions
1) Working area
2) Electrical safety
3) Personal safety
GB-2
a) Keep your working area clean and tidy.
Untidy and poorly lit working areas may
lead to accidents.
b) Do not operate the tool in potentially ex-
plosive environments containing com-
bustible fluids, gases or dusts. Power
tools generate sparks that may ignite dusts
or fumes.
c) Keep children and other persons away
when you are operating the power tool.
Distractions may result in the operator loos-
ing control over the tool.
a) The mains plug of the power tool must
fit into the mains socket. The plug must
not be modified in any way. Do not use
adapter plugs/connectors in combina-
tion with tools with protective earthing.
Unmodified plugs and fitting sockets reduce
the risk of electric shock.
b) Avoid physical contact with earthed sur-
faces as pipes, heaters, ovens and re-
frigerators. There is an increased risk of
electric shock if your body earthed.
c) Keep the tool out of the rain. The pen-
etration of water into a power tool increases
the risk of electric shock.
d) Do not use the cable to carry or hang
up the tool or to pull the plug out of the
socket. Keep the cable away from heat,
oil and sharp edges or moving parts
of the tool. Damaged or tangled cables
increase the risk of electric shock.
e) When operating a power tool outdoors,
use exclusively extension cables that
are approved for outdoor-use. The use of
an extension cable that is suitable for out-
door use reduces the risk of electric shock.
a) Always pay attention to what you do and
apply reasonable care when working
with a power tool. Do not use the tool
when you are tired or under the influ-
ence of medication, drugs or alcohol.
When working with power tools even a
short moment of inattentiveness may result
in severe injury.
b) Wear personal protection equipment
and always wear eye protection (safety
goggles). Wearing personal protection