Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
CONTENT
Illustrations
Pictogram illustration and explanation
Technical data
Switching on and off
Declaration of Conformity
Service
Electric Hedge Trimmer EHS 650 OKAY
Technical data
Operating Voltage
Nominal Frequency
Nominal Consumption
No-load Speed n
0
Cutting length
Cutting capacity
Weight (without flex)
Noise Pressure Level L
pA
Vibration according to EN 60745
Class of protection: II / DIN EN 60745/VDE 0740
Emissions
- The specified vibration emission value was measured by a standardized test methods and can compare with other
power tools are used.
- The specified vibration emission value can also be necessary for the assessment of work breaks are used.
- The specified vibration emission value can vary during the actual use of the electric tool by specifying the value,
depending on the way how to use the power tool.
- Note: You create the privilege against vascular pulsations of the hands in time breaks.
The noise pressure level at the place of work can exceed 80 dB(A). In such cases the operator will require noise
protection (e.g. wearing of ear protectors).
Attention: Noise protection! Please observe the local regulations when operating your device.
Interference suppressed in accordance with EN 55014, EN 61000-3-2, EN 61000-3-3.
We reserve the right to make changes to the technical specifications.
The devices are manufactured in accordance with the provisions of EN 60745-1and EN 60745-2-15 and fully comply with
the provisions of the German Product Safety Act.
GB | Operating Instructions
according to 2000/14/EG dB (A)
V~
230-240
Hz
50
W
650
min
1500
-1
mm
550
mm
22
kg
3,2
90
K 2,5 dB (A)
m/s
4,4
K 1,5 m/s
2
GB-1
Translation of the original Operating Instructions
Page
1 - 3
4
GB-1
GB-2
GB-2
GB-4
GB-5
GB-5
GB-5
GB-5
GB-5
GB-5
GB-6
GB-6
GB-6
GB-6
GB-6
GB-6
GB-7
2
Publicité
Chapitres
Table des Matières
