Chapter 8 : Updating The Graphic Switcher Ii; Update Instructions - Analog way GRAPHIC SWITCHER II GSW2811R Manuel Utilisateur

Chapter 8 : UPDATING THE GRAPHIC SWITCHER II

The GRAPHIC SWITCHER II
8-1. CONNECTIONS:
Connect the "REMOTE RS-232 & TALLY OUT" connector of the GRAPHIC SWITCHER II
of your COMPUTER with a DB9 M/F straight cable.
Connect the GRAPHIC SWITCHER II
Switch OFF the GRAPHIC SWITCHER II

8-2. UPDATE INSTRUCTIONS:

Open the file "Analog way GSW2811R updater" (in start/Program/ANALOG WAY/GSW2811R).
Click on "START" on the SOFTWARE.
Press the ENTER button of the GRAPHIC SWITCHER II
(REAR PANEL SWITCH = I ). All front panel keys switch ON and OFF, the LCD screen displays Downloading,
and the update will start. Then you can release the ENTER button.
When the software displays "Program operation completed", SWITCH OFF and ON the GRAPHIC SWITCHER
™
II with the REAR PANEL SWITCH.
Click on the "Quit" button to close the update software.
NOTE: YOUR GRAPHIC SWITCHER II
NOTE: THE UPDATER FILES ARE AVAILABLE ON OUR WEB SITE: www.analogway.com
PAGE 28
™
can be update thanks a COMPUTER (PC) via its REMOTE (RS-232) connector.
™
to an AC power outlet.
™
™
IS NOW READY TO WORK.
™
(REAR PANEL SWITCH = O).
™
(FRONT PANEL), and SWITCH it ON simultaneously
GRAPHIC SWITCHER II™
™
to the SERIAL port