Chapter 6 : Updating The Device; Update Instructions - Analog way OCTRO-QUATTRO OTR401 Manuel Utilisateur

OCTO-QUATTRO™

Chapter 6 : UPDATING THE DEVICE

™
The OCTO-QUATTRO
6-1. CONNECTIONS
Connect the "RS-232" connector of the OCTO-QUATTRO
M/F straight cable.
Connect the OCTO-QUATTRO
Switch OFF the OCTO-QUATTRO

6-2. UPDATE INSTRUCTIONS

Open the file: Octo-Range-Update.exe (in Start > Program > ANALOGWAY > Octo-Range).
In the Port menu select the COM port connected to the device.
Click on "START" on the SOFTWARE.
Press the ENTER button of the OCTO-QUATTRO
(FRONT PANEL SWITCH = I ). The LCD screen displays Downloading, and the upgrade will start. Then you can
release the ENTER button.
When the software displays "Program operation completed", SWITCH OFF and ON the OCTO-QUATTRO
the FRONT PANEL SWITCH.
Click on the "Quit" button to close the update SOFTWARE.
NOTE: YOUR OCTO-QUATTRO
NOTE: If the "BAD TYPE DEVICE" message appears, selects the devices type in the Device menu, and renew the
previous operations (
NOTE: The updater files are available on our web site: http://www.analogway.com
can be updated thanks a COMPUTER (PC) via its RS-232 communication port only.
™
to an AC power outlet.
™
(FRONT PANEL SWITCH = O).
™
IS NOW READY TO WORK.
to ).
™
to the SERIAL port of your COMPUTER with a DB9
™
(FRONT PANEL), and SWITCH it ON simultaneously
™
with
PAGE 19