Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Chapter 7 : UPDATING THE DEVICE
The OCTO can be updated thanks a COMPUTER (PC) via its RS-232 communication port only.
7-1. CONNECTIONS
Connect the "RS-232" connector of the OCTO to the SERIAL port of your COMPUTER with a DB9 M/F straight
cable.
Connect the OCTO to an AC power outlet.
Switch OFF the OCTO (FRONT PANEL SWITCH = O).
7-2. UPDATE INSTRUCTIONS
Open the file: Octo-Range-Update.exe (in Start > Program > ANALOGWAY > Octo-Range).
In the Port menu select the COM port connected to the device.
Click on "START" on the SOFTWARE.
Press the ENTER button of the OCTO (FRONT PANEL), and SWITCH it ON simultaneously (FRONT PANEL
SWITCH = I ). The LCD screen displays Downloading, and the upgrade will start. Then you can release the ENTER
button.
When the software displays "Program operation completed", SWITCH OFF and ON the OCTO with the FRONT
PANEL SWITCH.
Click on the "Quit" button to close the update SOFTWARE.
NOTE: YOUR OCTO IS NOW READY TO WORK.
NOTE: If the "BAD TYPE DEVICE" message appears, selects the devices type in the Device menu, and renew the
previous operations (
NOTE: THE UPDATER FILES ARE AVAILABLE ON OUR WEB SITE: www.analogway.com
PAGE 28
to
).
OCTO range
Publicité
Table des Matières
