Analog way GRAPHIC SWITCHER II GSW2811R Manuel Utilisateur page 23

GRAPHIC SWITCHER II™
3-5[color] + ENTER
Adjust the color with
3-6[hue] + ENTER.
Adjust the tint of the picture (NTSC video sources only) with
3-7[image process] + ENTER.
Select a level of process with
3-8[pos status] + ENTER.
Display the horizontal and vertical position status.
3-9[size status] + ENTER.
Display the horizontal and vertical size status.
3-10 [preset] + ENTER.
This function allows setting all the image parameters to the factory settings. Select [YES] and validate with ENTER.
4 [EFFECT MENU]
This menu allows to store an effect in the 4 Effect memory keys (front panel keys).
First select an effect key with
4-1[effect 1 key]
4-2[effect 2 key]
4-3[effect 3 key]
4-4[effect 4 key]
Then select one of the following effects:
4-x-1 [cut] =
4-x-2 [fading] =
4-x-3 [title] =
4-x-4 [shadow title] = Same function as [title] but a shadow bar appears at the bottom of the image. This function
+ ENTER.
, and validate with ENTER.
+ ENTER between:
allows to switch seamlessly the pre-selected input onto the MAIN output.
allows to fade the pre-selected input to the MAIN output . You can select the duration of the
transition as indicated below :
• [1s] =
1 second transition.
• [3s] =
3 seconds transition.
• [5s] =
5 seconds transition.
• [custom] = allows to select a duration from 0.5 second up to 25 seconds by 0.5 second steps.
allows to overlay a title on the MAIN output . The title should be done with drawn standard
software (Paint, PowerPoint...) in white color on a black background . You can select the
duration of this effect between:
• [holding] = the text appears after pushing on the TAKE key, and will be removed only by a
second push on the TAKE key.
• [3s] =
3 seconds transition.
• [5s] =
5 seconds transition.
• [custom] = allows to select a duration from 0.5 second up to 25 seconds by 0.5 second steps.
allows increasing the readability of the text on bright images.
Select the [duration] of the transition with
• [holding] = the text appears after pushing on the TAKE key, and will be removed only by
a second push on the TAKE key.
• [3s] =
3 seconds transition.
• [5s] =
5 seconds transition.
• [custom] = allows to select a duration from 0.5 second up to 25 seconds by 0.5 second
steps.
Select the [size] of the shadow bar with
Select the vertical [position] of the shadow bar with
Select the [intensity] of the shadow with
Chapter 7 : LCD FUNCTIONS DESCRIPTION (continued)
+ ENTER.
+ ENTER between :
+ ENTER.
+ ENTER.
+ ENTER.
PAGE 23