Analog way GRAPHIC SWITCHER II GSW2811R Manuel Utilisateur page 22

Chapter 7 : LCD FUNCTIONS DESCRIPTION (continued)
3 [IMAGE MENU] + ENTER.
NOTE: The IMAGE adjustments act on the selected and/or the pre-selected input. Select [MAIN] to adjust the image
displayed on the MAIN output and select [PREV] to adjust the image displayed on the PREVIEW output.
• If the selected input is a COMPUTER signal (LCD menu # 1-2 = Computer---) the IMAGE MENU displays the
following items :
3-1[Black level] + ENTER.
Adjust the black level with
3-2[H. smooth] + ENTER.
• [ON] = Vertical smoothing active.
• [OFF] = Vertical smoothing inactive.
3-3[V. smooth] + ENTER.
• [ON] = Horizontal smoothing active.
• [OFF] = Horizontal smoothing inactive.
3-4[optimize] + ENTER.
[#3 optimize] = Optimization of the input #3 image.
3-5[aspect ratio] + ENTER.
Select the Aspect Ratio of your input source with
• [4/3 standard] = 4/3 input format.
• [letterbox] =
• [16/9] =
3-6[pos status] + ENTER.
Display the horizontal and vertical position status.
3-7[size status] + ENTER.
Display the horizontal and vertical size status.
3-8[preset] + ENTER.
This function allows setting all the image parameters to the factory settings. Select [YES] and validate with ENTER.
• If the selected input is a VIDEO signal (COMPOSITE, S.VIDEO, COMPONENT, RGsB or RGBS) the IMAGE
MENU display the following items :
3-1[U / Overscan] + ENTER.
Select an item with
• [underscan] = Underscan mode. The entire image is visible on the screen. Computer display mode is underscan.
• [overscan] =
3-2[aspect ratio] + ENTER.
Select the Aspect Ratio of your input source with
• [4/3 standard] =
• [letterbox] =
• [WS anamorphic] = Wide Screen anamorphic input format.
3-3[brightness] + ENTER.
Adjust the brightness with
3-4[contrast] + ENTER.
Adjust the contrast with
PAGE 22
+ ENTER.
Letterbox input format.
16/9 input format.
+ ENTER.
Overscan mode. The image is displayed about 8 % bigger than in underscan mode, to avoid seeing
the corners and the borders. Standard TV display mode is overscan.
4/3 input format.
Letterbox input format.
+ ENTER.
+ ENTER.
+ ENTER.
+ ENTER.
GRAPHIC SWITCHER II™