Analog way GRAPHIC SWITCHER II GSW2811R Manuel Utilisateur page 27

GRAPHIC SWITCHER II™
5 [CONTROL MENU]
5-1[languages]
5-2[key locking] + ENTER.
Select which locking function you need with
• [input] =
• [adjust] = Lock or unlock the adjust functions.
• [effects] = Lock or unlock the effect key.
• [control] = Lock or unlock the LCD control key.
• [freeze] = Lock or unlock the FREEZE keys.
NOTE: To unlock the control key, pushes simultaneously on ENTER and EXIT.
5-3[key brightness] + ENTER.
Select the level of the key brightness with
5-4[erase all mem] + ENTER.
This function allows erasing all the NON-volatile image memories. Select [YES] and validate with ENTER.
5-5[demo mode] + ENTER.
This mode allows playing a sequence of effect every 4 seconds. Select [YES] and validate with ENTER.
5-6[versions] + ENTER.
Display the status of the internal firmware.
• A = xxxx
• D = xxxx
5-7[default value] + ENTER.
This function allows setting all the image parameters to the factory settings. Select [YES] and validate with ENTER.
Then switch OFF and ON the device.
FUNCTION
1-2 RGB/YUV inputs
1-3 video standard
1-4 used Inputs
1-5 H Sync Load
1-6 CV/SV mode
2-1 output format
2-2 output rate
2-4 output sync
2-5 type of screen
2-6 tally
Lock or unlock the input keys.
• B = xxxx
• K = xxxx
POSITION
computer HV/C
auto
used
Hi-Z
4 CV + 2 SV
XGA 60Hz
internal rate
separate H & V
screen 4/3
tally 1 = RGB/YUV 1
tally 2 = compos. 9
tally 3 = s.video 1
tally 4 = SDI.
Chapter 7 : LCD FUNCTIONS DESCRIPTION (continued)
+ ENTER.
+ ENTER.
• X = xxxx
• V = xxxx (optional)
FUNCTION
2-8 test pattern
2-9-1 video standard
2-9-2 output rate
2-9-3 flicker adjustment
2-9-4 U/Overscan
4-1 effect 1 key
4-2 effect 2 key
4-3 effect 3 key
4-4 effect 4 key
5-2 key locking
5-3 key brightness
• Y = xxxx • S = xxxx
• I = Identification number.
POSITION
OFF (main and preview).
NTSC.
internal.
0.
Over scan.
cut
fading 3.0s
hold. title man.
diamond in 3.0s
OFF
3
PAGE 27