Dashboard: Monitoring View (With Smooth Lines) - Carel PVPRO Mode D'emploi

ENG
If a unit has been wrongly associated as a device featuring the Smooth lines yet does not actually feature
such function , PVPRO will fail to acquire the operating conditions from this device and will indicate it as N/A.
As modifying the suction pressure set point may aff ect control of the line, and PVPRO does not know the
unit's operating conditions, the plug-in will reset the set point to the minimum value.
These two particular scenarios are illustrated in Figure 2.f.
Y
yellow

2.5 Dashboard: monitoring view (with Smooth lines)

In the "Details" tab, users can have a detailed overview of unit status. There is a summary of the settings, both
relating to PVPRO and to pRack, and the value of the working set point, with some historical samples.
At the bottom of the page, a table shows the count of units for each colour, divided between online and
offl ine.
Summary table
with plug-in
settings
+030220575 - 1.1 - 04.12.2014
O R
orange red
Fig. 2.f
Fig. 2.g
12
if an utility is market as N/A, it means
it doesn't feature the Smooth line
N/A
functionality and any setpoint
increment will be reset.
Current setpoint
and historical values
Main table with utilities status
Summary table with colour counting
Click here to enlarge
the historical view
STEP 2 STEP 2