Spypoint IR-10 Manuel De L'utilisateur page 30

30
Format:
Protect:
exit:
• Watching on tV: You can view the photos or videos
directly from TV. Connect the yellow end of the cable supplied
into the « VIDEO IN » of the TV and the other end into the
« TV OUT » of the camera. The options are the same as when
viewing on the screen 2.4"(see above).
DISTANCE
The « DISTANCE » dial (placed on the side of the camera) can
adjust the sensitivity of the detector. The camera is equipped
with a detector sensitive to infrared. The system detects
only heat source in motion. The greater the mass of heat,
more sensitive is the system. Range of detector is between 5
and 50 feet. Turn dial up to increase distance. The best way
to adjust the distance is to set the camera in mode « TEST »
(see above). Make sure to have the least possible objects in
front of the camera during the positioning. This prevents picture
taken by the camera when oriented towards the sun while an
object moves in front of the camera (eg. a branch).
DOWNLOAD TO A COMPUTER
To transfer or view photos and videos on a PC, you must first
turn the camera « OFF » and connect the USB cable (supplied)
from the camera and to your computer. The computer will
recognize the camera and install the software itself. Click on
« My Computer » and select « Removable Disk ». Then click
« DCIM » and « 100DSCIM » to find all your photos and
videos.
Taking the SD card out of the camera and inserting it into the
computer port will achieve same results. If no SD slot is built
into the computer, a multi-card reader RD25-1 (sold separately)
must be used.
To format memory card and to erase all
protected photos and videos.
To protect the photo or the video seen on
the screen.
To return to viewing screen.