Spypoint IR-10 Manuel De L'utilisateur page 27

RESOLUTION
4 MP
5 MP
6 MP
8 MP
12 MP
In « TEST » mode, if the SD card is locked, the screen indicates
« CARD PROTECT » and the light in the front of the camera
remains on.
SETTINGS
turn the camera to « ON » and navigate the interface by
pressing «  », «  », «  » or «  », press « OK » for
selection. to modify the selection, press «  » and «  »
again and press « OK » to confirm. to return to the previous
menu press « BACK ».
Photo
Video
T
Test
movement, the light winks to indicate that normally, a photo
or video would be recorded. If the system does not detect the
movement, increase the distance detection using the wheel
« DISTANCE » or realign the system differently. When you
understand how the device responds to detections, you can
better adjust the direction or the height of the installation.
2.0 GB 4.0 GB
1024
816
640
584
480
PhOtO
When the « PHOTO » mode is selected, the
test light in the front of the camera winks for
60 seconds to allow the operator to walk away
from the camera.
VideO
When the « VIDEO » mode is selected, the
test light in the front of the camera winks for
60 seconds to allow the operator to walk away
from the camera.
teSt
To use to set the camera or the distance setting.
When the « TEST » mode is selected, no picture
or video is recorded. Walk perpendicularly in
front of the camera. When the camera detects
8.0 GB
2048 4096
1632 3264
1280 2560
1168 2336
960 1920
27
32 GB
16384
13056
10240
9344
7680