Spypoint IR-10 Manuel De L'utilisateur page 29

Quality:
Continuous:
temperature:
Power:
View
• Viewing with the 2.4" SCReeN: When camera is set to
« VIEW », the last recorded photo or video recorded appears
on the screen automatically. Press «» or «» to view next or
previous images. Press «» and «» to zoom in and out. When
the zoom is activated, press « OK » to move the image by using
«», «», «» or «». Press « OK » again then «» to return
to normal view.
Press « OK » to view the different options available in
« VIEW » mode.
date and time:
erase:
erase all:
To select the photo quality. If the user
wishes to record more images on the
memory card this option allows very
high quality of 10 MP or lower quality
such as « normal » 5 MP or « low » 3 MP.
To allow taking pictures even if the
memory card is full. The camera will
continue to record photos by deleting the
first pictures recorded.
To select the temperature display in °F or °C.
To allow you to select the battery power
or the electricity power.
VieW
To view recorded photos or videos on TFT
2.4" viewing camera screen or on a TV
set at home.
To enlarge the imprinted date and time
on the picture.
To erase the photo or the video seen on the
screen.
To erase all stored photos and videos,
with the exception of protected photos
and videos.
29