Spypoint BF-12HD Manuel D'utilisation page 7

12
Allow the user to select the recording time
Video length:
(10s/30s/60s/90s)
when the camera is set in VIDEO mode.
Select a language for the camera menus.
Language:
(English/Français/
Deutsch)
Set the date as Month/Day/Year
Date:
Set the time as Hour/Minute
Time:
Select
Stamp:
(Yes/No)
temperature and moon phases on photos.
Set the photo resolution.
Quality:
(High/Normal/
Low)
Select the temperature display in °F or °C.
Temperature:
(°C/°F)
Allow the user to take pictures or videos even
Continuous:
(Yes/No)
if the memory card is full. The camera will
continue to record photos or videos by deleting
the first recorded files.
or cancel printing date,
New moon:
Waxing Crescent:
First Quarter:
Waxing Gibbous:
Full moon:
Waning Gibbous:
Last Quarter:
Waning crescent:
High: 12 MP
Normal: 8 MP
Low: 5 MP
Power:
(Batteries/
Electricity)
time,
Time Lapse:
(Off/30s/1m/3m/
5m/15m/30m/1h)
Allows the user to select the type of power
supply.
Choose "Electricity" if the camera is powered
by a main electric supply. (using a 12-volt
DC adapter AD-12V, sold separately). Main
electric power supply is recommended when
use for security purposes. It provides an instant
trigger time when a movement is detected. The
lithium battery pack and the AA batteries can
remain safely inside the camera and it is ideal
in case of a blackout. A 12-volt DC adapter
that can provide a minimum of 800 mA is
required (See OPTIONS for accessories).
Note: When using the electricity power, the
MULTI-SHOT mode and the DELAY between
photos are disabled as the camera triggers
instantly every time it detects motion. Also,
the printing of the temperature on each picture
is disabled.
Allow the user to set the frequency at which time
the camera takes a picture, without detection.
For example, if the option "5 minutes" is
selected in the TIME LAPSE mode, the camera
takes a picture every 5 minutes during that period
of operation (start time and stop time) even if
there is no detection.
This option allows the user to obtain
pictures of game outside the detection range
of the camera.
Note: The TIME LAPSE mode only applies
in PHOTO mode, not in VIDEO mode. When
TIME LAPSE mode is selected, the DELAY
mode and the MULTI-SHOT mode are
disabled. The photo resolution remains the
same except for the low resolution which are
reduced to 800 x 600.
13