Spypoint BF-12HD Manuel D'utilisation page 4

6
CONTENTS
• SPYPOINT ® BF-12 HD /S-BF-12
• Installation strap
• USB cable
• Audio/video cable
• User manual
POWER
The battery level is shown in the bottom right corner of the
screen when the camera is in TEST mode. When a single line
remains, the camera will continue to take pictures but we
strongly recommend changing the batteries before they are
empty. (See figure below)
AA batteries
This camera requires the use of 6 AA batteries (1.5V). The use
of alkaline or lithium batteries is strongly recommended. Also
note that the voltage of rechargeable AA batteries (1.2V)
is insufficient to power your SPYPOINT
installing the AA batteries, slide the switch inside the battery
case to ALK. Insert the batteries as indicated inside the battery
case and follow the exact polarity. We also recommend the
use of new batteries to ensure maximum performance of your
camera.
Lithium battery pack
This camera SPYPOINT
lithium battery pack LIT-09/LIT-C-8 (sold separately, refer to
the section OPTIONS). This type of battery is less affected by
cold temperatures and lasts up to 3 times longer than an alkaline
battery. While installing the lithium battery pack, slide the
switch inside the battery case to LIT-09.
HD
camera. While
®
can be powered by a rechargeable
®
External (12V)
The camera can also be powered from an external 12-volt
DC input such as a 12-volt battery (KIT-12V/BATT-12V, sold
separately) or a 12-volt adapter (AD-12V, sold separately).
During the installation of a 12-volt connection, slide the switch
inside the battery case to ALK. If combined with a lithium
battery pack, slide the switch to LIT-09.
available, refer to the section OPTIONS.
Solar panel
This model also offers the possibility to connect a solar panel
SP-12V (sold separately, refer to the section OPTIONS) to
maintain the charge of the lithium battery pack (sold separately,
refer to the section OPTIONS) or the 12-volt battery (sold
separately, refer to the section OPTIONS). While installing
the rechargeable lithium battery or 12-volt battery, slide the
switch inside the battery case to LIT-09 to activate the charging
system of the solar panel.
Power source
• 6AA
• 12V
• 12V + 6AA
• LIT-09
• 12V + LIT-09
• Solar panel + LIT-09
For the accessories
Switch position
ALK
LIT-09
7