Spypoint BF-12HD Manuel D'utilisation page 5

8
Note: The optional steel security box (SB-91) affects the
wireless functionalites of products compatible with REMOS
technology.
DISTANCE
Turn the dial DISTANCE located on the right side of the camera
to the right to increase the sensitivity.
This dial allows to adjust the sensitivity of the detector. The
camera is equipped with a detector sensitive to infrared. The
system will only detect a heat source in motion. The greater
the mass of heat, the more sensitive the system is. The range
of detection is between 5 and 50 feet. The best way to adjust
the distance is to set the camera in TEST mode. Make sure to
have the least possible objects in front of the camera during
the positioning. This will prevent pictures to be taken by the
camera when oriented towards the sun while an object moves
in front of the camera (e.g. a branch).
SETTINGS
Turn ON the camera and navigate in the interface by
pressing , ,  or , press OK for selection. To modify
the selection, press  and  again and press OK to confirm.
To return to the previous menu, press BACK.
PHOTO
Press OK to select PHOTO mode; the test light
in front of the camera will flash for 60 seconds to
Photo
allow the operator to walk away from the camera
without being photographed.
9
TM