Putting Into Operation; Switching On/Off - Waldmann HI 20 N Série Mode D'emploi

GB GB Instructions for Use Halogen Light HI.. 20 Instructions for Use Halogen Light HI.. 20

Putting into operation

Fig. 14
14.1
Putting into operation
Before putting the light into opera-
tion, the user has to check whether
the mains voltage is identical with
the rated voltage specified on the
rating plate.
Adjusting the
articulation joints
Depending on the design, the light
is equipped with a different number
of articulation joints.
The articulation joints, except for
the joint directly on the light head,
can be adjusted. Each joint must
be adjusted so that the light is - on
the one hand - easily movable and
- on the other hand - remains in the
position adjusted by the user.
Operation
Fig. 15
15.1

Switching ON/OFF

For lights with incorporated off
switch, the light can be turned on
and off by actuating the switch
(15.1).
19