Mounting; Connection; Mains Supply - Waldmann HI 20 N Série Mode D'emploi

GB GB Instructions for Use Halogen Light HI.. 20 Instructions for Use Halogen Light HI.. 20

Mounting

Fig. 12
18
Mounting
Lights equipped with mounting
flange (see Fig. 12) can be screw-
mounted directly.
Other designs must be positioned
stable on the mounting surface
by means of a desk clamp, wall
bracket, desk stand, support or
other suitable adapter units.
The user has to verify the reliability
when using mounting elements
which have not been proposed by
the manufacturer.

Connection

Fig. 13a
Fig. 13b
Fig. 13c

Mains supply

Lights for mains supply
(HI.. 20 N)
Lights of international protection
class I are usually supplied with
shockproof plug (Fig. 13a).
Lights of international protection
class II are usually supplied with
Euro plug (Fig. 13b).
Strictly observe the protection class
of the light when positioning the
plug connection.
Lights for safety extra low
voltage (HI.. 20 S)
For lights with terminal strip
(Fig. 13c), the outlet must corre-
spond to the protection class of the
light and be adequately dimensio-
ned for the terminal strip.