Hypertherm Powermax45 XP Mode D'emploi page 5

Remove the external components
1. Remove the 2 screws
2. Remove the 2 screws
3. Carefully tilt the tops
pull the handle
4. Lift the cover off of the plasma power supply.
Powermax45 XP Field Service Bulletin
from the plasma power supply handle
1
from the bottoms of the front and rear panels.
2
of the front and rear panels away from the plasma power supply, and
3
out.
4
1
3
2
809940
Machine Interface Receptacle with Voltage Divider Board
1
4
2
.
4
3
5