Hypertherm Powermax45 XP Mode D'emploi page 14

Machine Interface Receptacle with Voltage Divider Board
6. Make sure that the ground clip
to the ground wire.
7. Put the ground clip into position to align with the
screw from the handle.
Install the external components
1. Attach the component barrier to the power PCB with the 2 plastic pins
2. Put the extended piece of the component barrier
and behind the gas hose
14
is connected
7
1
.
3
2
7
1
above the power cord connection points
2
3
809940 Field Service Bulletin
.
Powermax45 XP