Troubleshooting - VOLTCRAFT VC165 Mode D'emploi

12. TROUBLESHOOTING

In purchasing the DMM, you have acquired a product designed to the state of the art and operationally
reliable.
Nevertheless, problems or errors may occur.
For this reason, the following is a description of how you can easily remove possible malfunctions yourself:
Always observe the safety information!
Error
The multimeter
does not work.
The display shows
"ErrE"
No
measured value
change
Repairs other than those described above should only be carried out by an authorised specialist.
If you have any questions about handling the meter, our technical support is available.
Possible cause
Is the battery dead?
System error
Is the wrong measuring function activated
(AC/DC)?
Are the measuring lines reliably inserted in
the measuring jacks?
Is the Hold function activated (display "H")?
Fuse in the current measuring range defec-
tive
Remedy
Check the status.
Replace the battery.
Contact a service point.
The DMM must be inspected.
Check the measuring range (AC/DC) and
switch the function if required.
Check the proper fit of the measuring lines
Push the button "HOLD" to deactivate this
function.
Check the corresponding fuse.
45