Troubleshooting - VOLTCRAFT AT-200 Notice D'emploi

Troubleshooting

By purchasing the Digital Multimeter AT-200, you have acquired a product which has
been designed to the state of the art and is operationally reliable.
Problems and malfunctions may, however, arise.
For this reason, the following is a description of how you can eliminate possible mal-
functions yourself.
Always adhere carefully to the safety instructions!
Fault
The multimeter
does not function.
No measurement of current
possible.
No change of
measuring value
Repairs other than those just described should only be performed by an
authorised electrician.
If you have queries about handling the measuring device, our technical
support is available under the following telephone number:
Voltcraft, 92242 Hirschau, Tel. no. 0180 / 586 582 723 8
38
Possible cause
Is the batteries flat?
Check the charge condition of the battery.
Is the fuse for the 400mA or 10A current
range defect?
Check the fuse (fuse replacement)
Is the HOLD function active? Press the HOLD
button.