PR electronics 6334 Mode D'emploi page 9

Safety instructions
• Ex installation:
For a safe installation of 6334B in hazardous area the following must be
observed. The module must only be installed by qualified personnel who are
familiar with the national and international laws, directives and standards that
apply to this area.
• Repair:
Repair of the module must be done by PR electronics A/S only.
14
All manuals and user guides at all-guides.com
As manufacturer
hereby declares that the following product:
is in conformity with the following directives and standards:
EMC directive 2004/108/EC and later amendments
This declaration is issued in compliance with article 10, subclause 1 of the EMC
directive. For specification of the acceptable EMC performance level, refer to
the electrical specifications for the module.
The ATEX directive 94/9/EC and later amendments
Notified body for CENELEC/ATEX: UL International Demko A/S 0539
Rønde, 22 Dec. 2005
DECLARATION OF CONFORMITY
PR electronics A/S
Lerbakken 10
DK-8410 Rønde
Type: 6334
Name: 2-wire programmable transmitter
EN 61326
EN 50014 and EN 50020
Ex certificate: 99 ATEX 126960
Peter Rasmussen
Manufacturer's signature
15