Publicité
EML08011*
CHECKING PROPELLER
w
You could be seriously injured if the
engine accidentally starts while you are
near the propeller.
8 Before
installing the propeller, remove the
210012
spark plug caps from the spark plugs.
Also, put the shift control in Neutral,
put the main switch in the "OFF" posi-
tion and remove the key, and remove
the lanyard from the engine stop
switch. Turn off the battery cut-off
switch if your boat has one.
8 Do not use your hand to hold the pro-
peller when loosening or tightening the
propeller nut. Put a wood block
between the cavitation plate and the
602051
propeller to prevent the propeller from
turning.
1) Check each of the propeller blades for
wear, erosion from cavitation or ven-
tilation, or other damage.
2) Check the splines for wear and dam-
age.
3) Check for fish line winding around the
propeller shaft. Check the propeller
602054
shaft oil seal for damage.
Removal
1) Using the pliers provided, straighten
the cotter-pin and pull it out.
2) Remove the propeller nut.
3) Remove the propeller.
602052*
4-23
inspecting,
removing
GB
or
Publicité
Chapitres
Dépannage
