Possible Causes - LAVAZZA INOVY COMPACT IF900 Mode D'emploi

EN
N° Problem encountered
Machine does not turn on.
Power lights are off after
1 having pressed the
MULTIFUNCTION
button .
The machine requires a lot of
2
time to heat up.
3 The machine is very noisy.
4 The machine No supply.
34
TROUBLESHOOTING

Possible causes

Solution
1 - Machine is not connected Connected the machine to the
to the power source. power source.
2 - The machine is connect to Connected the machine directly
power strip not working. to the power source.
Connect another device to
3 - Power supply not present.
check the power supply.
1 - Machine storage at low Store the coffee machine in a
temperatures proper environment and run 2
(e.g.: cellar/garage). supplies without capsules.
2 - The machine has
Descale the machine.
limescale build-up.
1 - Machine not is on a flat Check the surface.
and stable surface.
Check the correct position of
2 - Power supply cable
the cable into the base of the
incorrectly positioned.
machine.
3 - Movable parts not fitted
Fit the movable parts properly.
properly.
Top up the tank with fresh
4 - No water in the tank.
drinking water.
Insert Lavazza capsule or
5 - Capsule not present.
compatible.
Press one of the buttons and
check the operation of the
1 - Electrical failure: buttons
pilot light (ON with white
not working.
blinking light) and the machine
power-on.
Top up the tank with fresh
2 - No water in the tank.
drinking water.
3 - Tank not inserted
Insert the tank correctly.
correctly.
Repeat the coffee machine
4 - Power-on failed.
power-on procedure.
Result
Ok: call solved.
Non-ok: go to step 2
Ok: call solved.
Non-ok: go to step 3
Ok: machine being serviced.
Non-ok: electric system fault.
Ok: call solved.
Non-ok: go to step 2
Ok: call solved.
Non-ok: machine being serviced.
Ok: call solved.
Non-ok: go to step 2
Ok: call solved.
Non-ok: go to step 3
Ok: call solved.
Non-ok: go to step 4
Ok: call solved.
Non-ok: go to step 5
Ok: call solved.
Non-ok: machine being serviced.
Ok: call solved.
Non-ok: go to step 2
Ok: call solved.
Non-ok: go to step 3
Ok: call solved.
Non-ok: go to step 4
Ok: call solved.
Non-ok: machine being serviced.