Temperature Setting And Controls - IARP AB 400 PV Farmacia Instructions D'emploi Et D'entretien

TEMPERATURE SETTING AND CONTROLS

Each refrigerating appliance is provided with an electronic thermostat for automatic maintenance of
the appropriate pre-established temperature inside the tank.
This temperature adjuster is gauged by the factory and should not be touched by the user.
Pushing button (A) you can see on display the Setpoint.
You can increment or decrement Setpoint by pushing button (C) or (B).
Defrosting is automatic: Push button (C) ( for 5") to set an automatic defrosting. During defrosting
time is alight led (F).
CONTROLS
1. Main switch
2. Light switch
3. Electronic control
MALFUNCTIONS AND REMEDIES
Most of the functioning inconveniences are generally due to simple causes or to defective electrical
connections. These problems can usually be solved on the place .
The unit does not start:
• check that there is voltage at the wall socket;
• check that the unit is properly plugged.
The internal temperature is not cold enough:
• check that the unit is not placed too close to any heating source;
• check that there is not too much ice on tank walls;
• check the temperature setting ;
• check that behind the cabinet air can properly circulate;
The unit is noisy:
• check that all the bolts and nuts are properly fasten;
• check that the unit is placed on an even surface;
• check if any pipe or fan is in contact with any other part of the body.
2 1
INFORMATIONS ABOUT SERVICE
ELECTRONIC
C
B
-8-
fnc
set
3
fnc
set
F A