Temperature Setting And Controls - IARP MIRA 23 N FLAT Instructions D'emploi Et D'entretien

TEMPERATURE SETTING AND CONTROLS

Each refrigerating appliance is provided with an electronic control for automatic maintenance of the
temperature inside the tank.
This temperature adjuster is gauged by the factory and should not be touched by the user.
Only if the average internal temperature is too cold or not cold you can proceed as follows:
- press for two times the (
- press the () key or the () key in order to increment or decrement the temperature set point
↲
- press the ( ) key in order to store the new temperature set point.
↲
) key in order to see on display the temperature set point.
-21-
CONTROLS
1) Light switch
2) Electronic control
1
2