Periodical Maintenance; Tank Cleaning - IARP AB 400 PV Farmacia Instructions D'emploi Et D'entretien

Masquer les pouces Voir aussi pour AB 400 PV Farmacia:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

PERIODICAL MAINTENANCE

Any further adjustments on the refrigerator necessarily require the electric plug to be removed.
Check periodically the supply cable in order to detect any damage.
If the power supply cable is damaged, don't use the equipment and don't try to repair it: to prevent any
risk, it must be replaced by the manufacturer, by a member of the after-sales service staff, or anyway
by a person having similar qualifications. In any case, none of the protective elements (the grill, the
carter) must be removed by non qualified staff. Absolutely avoid using the refrigerator without such
protection.
The replacement of neon tubes must be carried out only by an Authorized Service Center.
The lamps have to be replaced by identical lamps only.
For a good preservation of the cabinet's body a periodical cleaning is necessary.
EXTERNAL BODY: When necessary, the external body should be cleaned with a cloth and a neutral
soap and water solution.
STAINLESS STEEL SURFACES: wash with warm water and mild detergent, rinse well and dry
with soft cloth. Avoid scouring pads etc. which will spoil the finish of the stainless steel.
SURFACES IN PLASTIC MATERIAL: wash with warm water and mild detergent, rinse well and
dry with soft cloth; under no circumstances should alcohol, methylated spirits or solvents be used.
GLASS SURFACES: only use products specifically designed for glass cleaning; It is not advisable to
use ordinary water which can leave a film of calcium on the surface of the glass.

TANK CLEANING

For the cleaning operations proceed as follows:
1.
Place the product in refrigerated containers, kept at the same temperature and remove the
shelves.
2.
Switch off the group using main switch and unplug the unit.
3.
Extract the discharge tube plug, put below a tray for draining water.
4.
Remove the plug inside the tank.
5.
Wash very well tank walls, rinse and dry using a soft cloth and neutral soap.
Then plug in again and wait till the appliance reaches the right temperature before filling it again.
Do not use jet of water to clean the cabinet: electrical wiring could be damaged.
Never use mechanical devices or any other means to accelerate the defrosting process, other
than those recommended by the manufacturer.
SEASONAL WORK
When the unit is kept unused for a long time, please take note of the following procedures:
- unplug the unit;
- clean and dry well the tank;
- leave the door open to avoid possible formation of bad smells;
- cover the unit with a curtain, place it in a dry room and sheltered from the atmospheric agents.
IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT
IN ACCORDANCE WITH EC DIRECTIVE 2002/96/EC
At the end of its working life, the product must not be disposed of as urban waste.
It must be taken to a special local authority differentiated waste collection centre or to a dealer providing
this service. Disposing of a household appliance separately avoids possible negative consequences for
the environment and health deriving from inappropriate disposal and enables the constituent materials
to be recovered to obtain significant savings in energy and resources.
As a reminder of the need to dispose of household appliances separately, the product is marked with
a crossed-out wheeled dustbin.
-7-

Publicité

Table des Matières
loading

Table des Matières