Publicité
Date and Ti me Adjustment (Fig. B)
(1 )Press the mode button until the
year, month,
and
day appear on the display.
(2)Press the select button to choose which number
blinks.
(3)Press the set button to change the blinking
number.
•
Press the set button repeatedly until the desired
number is set.
(4)Repeat steps
(2)
and (3) until the
year,
month
,
and day are ali correct.
(5)Press the select button again alter ali of the
numbers have been changed. The numbers will
stop blinking and the
"ready"
symbol ( - ) will
appear above the
numbers.
The
camera is now
ready to be
used.
•
If you want to change the
time,
press the mode
button to display the
day, hour,
and
minute.
Using
the same method as was used to change the
49
date,
repeat steps (2) and (3) above
to
change
thetime
.
Press the select button alter changing the ti me.
Alter the
":"
has started to
blink,
press the select
button a gain to put the camera in the
"ready"
state.
•
To change the seconds
,
first make the
":" blink,
and
then
use the set button
to
adjust the seconds.
You can obtain the exact
ti
me from
the
radio or a
time signal broadcast. Alterwards press the select
button to put the camera in the
"ready"
state.
Publicité
