Warranty And Liability; Safety Instructions - SATA air check set Mode D'emploi

Operating instructions SATA air check set
EN

1.5. Warranty and liability

The SATA General Conditions of Sale and Delivery and further contractual
agreements, if applicable, as well as the valid legislation at the time apply.
SATA is not liable in case of
■ When the operating instructions are disregarded.
■ When the product is used in other than the intended ways of usage.
■ When untrained staff are employed.
■ When no personal protection equipment is worn.
■ Failure to use original accessories, spare parts and wear parts
■ When the product is manipulated, tampered with or technically modi-
fied.
■ Natural wear / and tear
■ In case when the product has been exposed to untypical shockloads
and impacts during usage.
■ Assembly and disassembly
1.6. Applicable directives, regulations and standards
EC directive 2014/34/EC
Equipment and protective systems intended for use in potentially explo-
sive atmospheres (ATEX)
DIN EN 1127-1
Explosive atmospheres Part 1: Basic concepts and methodology
DIN EN ISO 80079-36
Non-electrical equipment for use in potentially explosive atmospheres
Part 1: Basic method and requirements
DIN 31000
"General principles for the safe design of products."
DGUV-R 100-500
Operation of technical working equipment

2. Safety Instructions

Read and comply with all directions listed in the following. Non-compli-
ance or incorrect compliance can lead to malfunctions or severe injuries
and even death.
26