Publicité
5.1 USE OF LEDS
The function function of each LED is described in the table below .
LED
MODE
OPEN
Blinks
OPEN
Blinks
OPEN
Blinks
OPEN
OPEN
OPEN
OPEN
Blinks
6. MAXIMUM AND MINIMUM TEMPERATURE RECORD
6.1 SEE THE MINIMUM TEMPERATURE
1. Press and release the ▼ key.
2. First it shows '' Lo '' message, then the recorded minimum temperature.
3. ▼ Pressing the button again or waiting for 5 seconds returns to normal display.
6.2 SEE THE MAXIMUM TEMPERATURE
HE
1.
Press and release the key.
2. First the '' Hi '' message is displayed, followed by the maximum recorded temperature.
3. Press the O Key again or wait for 5 seconds to return to normal display.
6.3 RESETTING SAVED MAXIMUM AND TEMPERATURE VALUES
1. While the maximum or minimum temperature is displayed, press and hold the SET KEY for more than
3 seconds (rSt message appears).
2.''rSt'' message will flash and normal temperature display will return.
FUNCTION
The compressor works
Blinks Between Compressor Operations
Defrost Works
Drainage Time
Fans On
Fan Delay After Defrost
Alarm Status Exists
There is a Continuous Cycle
Energy is saved
Unit of Measurement
Programming Phase
www.combisteel.com
9
Publicité
