Publicité
1. GENERAL INFORMATION
1.1 INFORMATION USAGE
This manual It contains information on installation, operation and maintenance. In addition to the information
contained in this manual, the user must comply with all local health and safety controls and generally applicable
safety regulations. The safe and correct use of the device is based on the safety instructions and operating
instructions contained in this manual. The user manual is a part of the product and should be kept near the
equipment and kept in a place easily accessible by personnel who will perform installation, maintenance and
cleaning.
1.2 GENERAL INFORMATION EXPLANATION
This chapter provides an overview of all important safety issues. Each chapter contains precise instructions on
avoiding the dangers indicated by the use of the warning signs mentioned above. Optimum protection against
all hazards and trouble-free operation are guaranteed if all important safety instructions are followed. This
device is designed in accordance with the latest technology. However, if the device is used incorrectly and for
its intended purpose, dangers may occur. In order to protect yourself from dangers, it is important to know the
contents of the user manual, avoid errors and operate the device safely and without errors. To avoid dangers
and ensure optimum performance, the device is recommended by the manufacturer. No changes should be
made that are not expressly approved.
1.3 SAFETY INSTRUCTIONS
Information regarding occupational health and safety is based on the European Union regulations valid at the
time the device was produced. If the device is used commercially, the user is obliged to ensure that the specified
occupational health and safety measures comply with the latest valid regulations and comply with new
specifications throughout the entire life of the device.
1.4 TECHNICAL SAFETY
•
Check the unit for visible external damage before installation. Do not commission and/or operate a
damaged unit .
The device can only be connected to a properly installed single socket outlet that is shielded and grounded.
•
Never unplug the power cord by pulling on the cord itself. Pull by holding the end of the plug
•
Make sure that the power cord does not come into contact with heat sources or sharp edges. The power
•
cord should not hang over the edge of the work surface. .Make sure that no one can step on or trip over the
cable.
•
The power cord should not be bent or twisted or wrapped.
•
Do not use the device if it is not working properly or if it is damaged.
•
Do not use accessories or spare parts that are not recommended by the manufacturer. It may cause damage
to the user or personal injury and void the warranty.
Do not move or bend the device while it is operating.
•
Never plug it in with wet or damp hands. Never operate the device on a wet or damp surface.
•
•
In case of a possible fire, pull the plug from the socket or disconnect the device from the electricity supply
before extinguishing it.
•
Do not let the device come into contact with water while it is on.
•
Unpack the device and destroy all packaging materials.
•
Place the device on a flat and solid surface.
•
Never place the device on a wet, damp or flammable surface.
•
Do not install the device near electric stoves or other heat sources.
Connect the power cable of the device only if it complies with the regulations.
•
WARNING: If the mains cable of the device is damaged, contact the manufacturer or distributor before
•
operating it.
www.combisteel.com
5
Publicité
