Publicité
All manuals and user guides at all-guides.com
On the left column appears the type of
decoded and finally a data box stating if the emission is encrypted or free (
FREE
), when the service supports interactive TV (
and when is inserted a
CAM
(
) appears.
When pressing the cursor arrow
window again, in order to fix on screen this window the vertical cursors
be pressed up to select the OSD:OFF field, so press rotary selector
OSD:ON.
Also the standard
rate for the digital service decodified, the aspect ratio (
vertical) for received video and the picture refreshment frequency rate. In the (OSD:OFF)
mode the information window previously described will appear whenever the rotary
selector is pressed again
When a digital channel is decodified, once the Table of Services
Description Table
) acquisition is completed, is possible to accede to the
services
contained in the Table.
For it place the field selector, by means of the vertical cursors
field of the active service (e.g. VTV 1 in the following figure) and later press the rotary
selector
[1].
Page 92
USER'S MANUAL.
DVB
CAM
TV EXPLORER
module into the
Figure 66.-
Digital channel monitoring.
[6] key will appear the tuning information
MPEG-2
profile is indicated which determines the compression
[1].
TV EXPLORER HD / HD
signal, a window showing the signal
MHP
, i.e. Multimedia Home Platform)
HD
/
HD
LE
[1] to switch to
4:3
), the resolution (horizontal x
SDT
[6] key, on the
LE
SCRAMB
or
the indication
[6] key must
Service
(
list of
10/2012
Publicité
