Publicité
All manuals and user guides at all-guides.com
TV EXPLORER HD / HD
USER'S MANUAL.
X
On the
-axis the time variables references are showed. At the bottom right
corner, the capture elapsed time is displayed, in seconds. At the bottom center the
T.span defines the seconds that will be displayed on the screen. For example, if the
T.span
is 60s, therefore the last 60s captured, will be displayed on the screen. On the
t
left corner the
variable is at time can be "end - time (s)" or "begin + time (s)".
The tag "end" indicates how many seconds you are from the last capture. To
select this option, go to the configuration menu and select the temporal reference "end".
The tag "begin" indicates how many seconds you are from when starting the
capture. To select this option, go to the configuration menu and select the temporal
reference "beginning".
Y
On the
-axis are placed the frequency variables. In this axis the initial and final
frequencies are showed and depend on the Spectrum Analyzer configuration. For
example if the Spectrum Analyzer frequency is 650 MHz and the Spam=100 MHz, the
Spectrogram will show as initial frequency 601MHz and end frequency 701MHz.
Next to the final frequency the cursor frequency and its signal level are displayed.
To move among the parameters press the cursor keys
To change a parameter, press the arrow keys
selector.
10/2012
LE
Figure 48.-
First Screen.
LEFT
UP
DOWN
or
.
RIGHT
or
or use the rotary
Page 71
Publicité
