Publicité
All manuals and user guides at all-guides.com
TV EXPLORER HD / HD
USER'S MANUAL.
NOTE:
The Attenuation Test is available for the TV terrestrial frequency band
and the
To switch between these frequencies press the key
5.11 Verification of distribution networks
(SAT IF Test / Attenuation Test)
This application allows to verify easily the TCI features (Telecommunications
Common Infrastructures) before the antennas and head-end devices are operative. The
procedure allows to evaluate the frequency response of a whole TV signals distribution
network by means of two steps:
NOTE:
For this application the use of
RP-250
signal generators are required, for which they have been specially
designed. If you use a generator that emits not modulated carriers, this may
cause a slight uncalibration during the
1.- CALIBRATION
Connect the generator directly to the
adapter.
10/2012
LE
Figure 15.-
End of data acquisition.
IF SAT
test is available for the TV Satellite frequency band.
PROMAX RP-050
TV EXPLORER
[14].
RP-080
,
SAT IF TEST
.
HD
/
HD
using the
LE
RP-110
,
or
BNC-F
Page 39
Publicité
