Publicité
All manuals and user guides at all-guides.com
Select a DVB-H/T Measure or TV signal screen and press
Merogram. The Merogram will run according to the TV o Measures signal configuration.
The figure below shows the initial screen.
On the X-axis the time variables references are showed. At the bottom right
corner, the capture elapsed time is displayed, in seconds. At the bottom center the
T.span
defines the seconds that will be displayed on the screen. For example, if the
T.span
is 60s, therefore the last 60s captured, will be displayed on the screen. At the left
corner the time variable can be "end - time (s)" or "begin + time (s)". The tag "end"
indicates how many seconds you are from the last capture. To select this option, go to
the configuration menu and select the temporal reference "end".
The tag "begin" indicates how many seconds you are from when starting the
capture. To select this option, go to the configuration menu and select the temporal
reference "beginning".
Page 76
USER'S MANUAL.
Figure 51.-
Merogram.
Figure 52.-
First screen.
TV EXPLORER HD / HD
LE
[22] then select
10/2012
Publicité
