Publicité
All manuals and user guides at all-guides.com
TV EXPLORER
USER'S MANUAL.
ANALOGUE SIGNALS MEASUREMENT
LEVEL MEASUREMENT
Measurement range
Terrestrial TV & FM bands
Satellite TV band
Reading
Numerical indication
Graphical indication
Measurement bandwidth
Audible indicator
Accuracy
Subband
Terrestrial bands
Satellite band
Overrange indication
MEASUREMENTS MODE
Terrestrial bands
Analogue channels
Digital channels
Satellite band
Analogue channels
Digital channels
DATALOGGER function
Analogue channels
Digital channels
SAT IF TEST Function
ATTENUATION TEST Function
4
Using PkTools software application with a PC.
5
Function to be used with RP-250 or RP-050 IF signal simulator.
6
Function to be used with RP-250 or RP-080 pilot signals simulator.
10/2012
HD / HD
LE
10 dBµV to 130 dBµV (3.16 µV to 3.16 V).
30 dBµV to 130 dBµV (31.6 µV to 3.16 V).
Auto-range, reading is displayed on an OSD
window.
Absolute value according to parameters.
Analogue bar on the screen.
230 kHz (Terrestrial band) 4 MHz (Satellite band)
According to span (maximum band ripple 1 dB).
Pitch sound. A tone with pitch proportional to signal
strength (only when using Antenna Alignment
function).
± 1.5 dB (30-120 dBµV, 5-45 MHz) (22 C ± 5 C).
± 1.5 dB (30-120 dBµV, 45-1000 MHz) (22 C ± 5 C).
± 2.5 dB (40-100 dBµV, 950-2050 MHz) (22 C ± 5 C).
<, >.
Level, Video-Audio ratio, Carrier-Noise ratio and
frequency deviation.
Channel power, Carrier-Noise ratio and Channel
identification.
Level and Carrier-Noise ratio.
Channel power and Carrier-Noise ratio.
Automatic acquisition and storage of measurements.
4
Level, C/N and V/A.
Frequency offset, MPEG-2 / MPEG-4 detection,
power, C/N, MER, CBER, VBER, LBER and noise
margin.
IF distribution network response for satellite band.
5
Signal distribution network response for terrestrial
6
band.
Page 7
Publicité
