Publicité
All manuals and user guides at all-guides.com
AUTO ID
If the
function is launched in the spectrum analyser mode, the name of
network
the
will appear temporarily on screen (it also appears in the measurement
display). In case of working in the satellite band the
While performing automatic identification may be the equipment keeps detecting
NETWORK ID
the
for a long time. During this process, the
SKIP
, which allows bypassing the
the auto-detection.
Whenever the process detects new parameters for a channel or frequency will
create a new channel plan containing the detected information.
NOTE
:
The
icon in the upper corner of a digital measurement screen states
that the signal level is higher than the minimum threshold (see the
PREFERENCES
wrong configuration parameter.
In such case, the user must press
NOTE
:
In the case that is desired to explore or identify
necessary to select previously a
by means of
5.9
Channel plans
The signal automatic identification process as much as the exploration of the
frequency spectrum could yield the generation of new customised channel plans relative
to the usual work locations of the meter equipment.
In this way the characterisation of the band will be faster and easier when causing
that the equipment only analyses a shorter set of channels.
Whenever a new process of exploration is activated, the
HD
analyses all the present channels in the active channel plan, which acts as pattern
LE
channel plan specified by means of the option
CONFIGURATION
measurement menu:
Page 34
USER'S MANUAL.
NETWORK ID
without losing the other parameters of
menu) but demodulator cannot lock it maybe due to some
AUTO ID
DVB-C
PREFERENCES
[22]
[17].
TV EXPLORER HD / HD
orbital position
appears as well.
CANCEL
button switches to
[25] key.
DVB-C
signals will be
standard as digital signal identifier
TER. IDENTIFY
menu (
TV EXPLORER
CHANNEL SET
from configuration
LE
option).
HD
/
10/2012
Publicité
