Publicité
All manuals and user guides at all-guides.com
Turn the rotary selector
[12] key to select the type of measurement to highlight on the monitor.
The available types of measurements are:
LEVEL
:
C/N
:
V/A
:
FM Deviation
:
When at the RF input appear an important number of carriers with a high level the tuning
circuit may become out of control, giving as a result wrong level measurements. To be
able to determinate the equivalent level of a carrier group (with similar levels) at the RF
input, it is possible to use the expression:
L t =L + 10 log N
L t : equivalent total level
L: average level of the carriers group
N: number of carriers
So, if there are ten carriers with a level around 90 dBµV, their equivalent level will be:
90 dBµV + 10 log 10 = 100 dBµV
Observe that in this case, loss of tuning by overload of the RF input may occur besides
other effects such as tuner saturation and generation of intermodulation products that
may mask the spectrum visualization.
Page 50
USER'S MANUAL.
[1] to change the tuning channel/frequency. Press the
Level indication
on the upper part of the screen (analogue
bar).
Carrier/Noise
ratio measurement.
Video/Audio
ratio measurement.
Measure the frequency peak deviation for any modulated
FM
analogue carrier in
.
TV EXPLORER HD / HD
LE
WARNING
10/2012
Publicité
